Engineering Question 2 of 10
Which option is a potential environmental benefit of adopting a new
technology?
A. Expanded customer base
B. Improved product quality
C. Reduced emission of pollutants
D. Higher numbers of sales

Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?

Asmall electric heater, immersed in 80g of water in a calorimeter of 40j/k raises the temperature from 10.5 degree celsius to 25 degree celsius in 12 minutes. using the same apparatus with 50g of oil instead of water, it is found that the temperature of oil rises from 7 degree celsius to 27 degree celsius in 10 minutes. find specific heat capacity of the oil.

A15 ohm resistor and a 25 ohm resistor are connected in a series to a 60 volt battery. what is the power used by each device