(a) When the toluene level in the tank is 150 cm below the top (h = 150 cm), the manometer fluid level in the open arm is at the height of the point where the manometer connects to the tank. What manometer reading, R (cm), would be observed if the manometer fluid is (i) mercury, (ii) water? Which manometer fluid would you use, and why? (b) Briefly describe how the system would work if the manometer were simply filled with toluene. Give several advantages of using the fluid you chose in Part (a) over using toluene. (c) What is the purpose of the nitrogen blanket?

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

grav forces affect all objects magnetic forces affect magnetic objects and electric currents

here are some information of the future of geothermal energy:

-the future of geothermal energy can pretty much be summed up with a single word: more

-scientists plan in going deeper than 120 meters

-we are hoping that one day, we will get all of our energy from renewable energy sources such as geothermal energy

hope this !

your answer is, orbit around the nucleus