Two inductors, L1 and L2, are in parallel. L1 has a value of 25 mH and L2 a value of 50 mH. The parallel combination is in series with L3, a 20 mH coil. The entire combination is across an ac source of 60 Vrms at 300 kHz. The total rms current is

Explanation:

For parallel inductors ,

For series combination

Total inductance

= 16.67 + 20

= 36.67 mH .

reactance of total inductance at 300 kHz

= ω where ω is angular frequency

= 2πf

= 2 x 3.14 x 300 x 10³ x 36.67 x 10⁻³

= 69.1 x 10³ ohm

Total rms current = Vrms / reactance

= 60 / 69.1 x 10³ A

= .87 x 10⁻³ A

= .87 mA

  distance on the y-axis and time on the x-axis.

explanation:

the instantaneous velocity = change in position/time taken

the slope of the graph should give instantaneous velocity.

  slope of a graph = change in value of y -axis / change in values of x -axis

  comparing both the equations

    change in value of y -axis = change in position

  change in values of x -axis = time taken

so position values should be on the y axis and time values should be on the x axis.

distance on the y-axis and time on the x-axis.

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

                                              ⇒      

here   k is the proportionality constant whose value is 1.

                                                            [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.