Physics, 16.07.2020 23:01 Jonny13Diaz

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleration of 26.0 rad/s2 until a circuit breaker trips at time t = 2.40 s. From then on, it turns through an angle 435 rad as it coasts to a stop at constant angular acceleration. Part APart complete Through what total angle did the wheel turn between t=0 and the time it stopped? Express your answer in radians. θ = 570 rad Previous Answers Correct Part B At what time did it stop? Express your answer in seconds. t = nothing s Request Answer Part C What was its acceleration as it slowed down? Express your answer in radians per second squared.

Answers: 3

Show answers

Answers

a) The total angle of the grinding wheel is 569.88 radians, b) The grinding wheel stop at t = 12.354 seconds, c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Explanation:

Since the grinding wheel accelerates and decelerates at constant rate, motion can be represented by the following kinematic equations:

$\theta = \theta_{o} + \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

$\omega = \omega_{o} + \alpha \cdot t$

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

Where:

$\theta_{o}$ , $\theta$ - Initial and final angular position, measured in radians.

$\omega_{o}$ , $\omega$ - Initial and final angular speed, measured in radians per second.

$\alpha$ - Angular acceleration, measured in radians per square second.

- Time, measured in seconds.

Likewise, the grinding wheel experiments two different regimes:

1) The grinding wheel accelerates during 2.40 seconds.

2) The grinding wheel decelerates until rest is reached.

a) The change in angular position during the Acceleration Stage can be obtained of the following expression:

$\theta - \theta_{o} = \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\theta-\theta_{o} = \left(25\,\frac{rad}{s} \right)\cdot (2.40\,s) + \frac{1}{2}\cdot \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)^{2}$

$\theta-\theta_{o} = 134.88\,rad$

The final angular angular speed can be found by the equation:

$\omega = \omega_{o} + \alpha \cdot t$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\omega = 25\,\frac{rad}{s} + \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)$

$\omega = 87.4\,\frac{rad}{s}$

The total angle that grinding wheel did from t = 0 s and the time it stopped is:

$\Delta \theta = 134.88\,rad + 435\,rad$

$\Delta \theta = 569.88\,rad$

The total angle of the grinding wheel is 569.88 radians.

b) Before finding the instant when the grinding wheel stops, it is needed to find the value of angular deceleration, which can be determined from the following kinematic expression:

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

The angular acceleration is now cleared:

$\alpha = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot (\theta-\theta_{o})}$

Given that $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\theta-\theta_{o} = 435\,rad$ , the angular deceleration is:

$\alpha = \frac{ \left(0\,\frac{rad}{s}\right)^{2}-\left(87.4\,\frac{rad}{s} \right)^{2}}{2\cdot \left(435\,rad\right)}$

$\alpha = -8.780\,\frac{rad}{s^{2}}$

Now, the time interval of the Deceleration Phase is obtained from this formula:

$\omega = \omega_{o} + \alpha \cdot t$

$t = \frac{\omega - \omega_{o}}{\alpha}$

If $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\alpha = -8.780\,\frac{rad}{s^{2}}$ , the time interval is:

$t = \frac{0\,\frac{rad}{s} - 87.4\,\frac{rad}{s} }{-8.780\,\frac{rad}{s^{2}} }$

$t = 9.954\,s$

The total time needed for the grinding wheel before stopping is:

$t_{T} = 2.40\,s + 9.954\,s$

$t_{T} = 12.354\,s$

The grinding wheel stop at t = 12.354 seconds.

c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Answer from: Quest

force is mass*acceleration.

we have a very small mass: 11.4*0.001 kg

if we want 0.035n of force, we need an acceleration:

0.035 = 11.4*0.001*a

a = 0.035/(11.4*0.001) m/s^2

Answer from: Quest

option number c is the right answer.

Another question on Physics

Physics, 22.06.2019 10:00

If a stone with an original velocity of 0 is falling from a ledgeand takes 8 seconds to hoybthe ground whays the final velocity of the stone

Answers: 2

Answer

Physics, 22.06.2019 11:00

The dot diagram represents the motion of the motorcycle as it moves from left to right

Answers: 3

Answer

Physics, 22.06.2019 19:20

On a hot saturday morning while people are working inside, the air conditioner keeps the temperature inside the building at 22degreesc. at noon the air conditioner is turned off, and the people go home. the temperature outside is a constant 33degreesc for the rest of the afternoon. if the time constant for the building is 4 hr, what will be the temperature inside the building at 4 : 00 font size decreased by 2 upper p . font size decreased by 2 upper m .? at 6 : 00 font size decreased by 2 upper p . font size decreased by 2 upper m .? when will the temperature inside the building reach 24degreesc? 324281

Answers: 3

Answer

Physics, 22.06.2019 23:00

According to the image below, which season is about to begin in the southern hemisphere? a. summer b. autumn c. winter d. spring

Answers: 1

Answer

You know the right answer?

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleratio...

Questions