A solenoid 25.0 cmcm long and with a cross-sectional area of 0.550 cm^2 contains 460 turns of wire and carries a current of 90.0 A. Calculate: a. the magnetic field in the solenoid.
b. the energy density in the magnetic field if the solenoid is filled with air.
c. the total energy contained in the coil’s magnetic field (assume the field is uniform).
d. the inductance of the solenoid.

a.  B = 0.20T

b.  u = 17230.6 J/m³

c.  E = 0.236J

d.  L = 5.84*10^-5 H

Explanation:

a. In order to calculate the magnetic field in the solenoid you use the following formula:

              (1)

μo: magnetic permeability of vacuum = 4π*10^-7 T/A

n: turns of the solenoid = 460

L: length of the solenoid = 25.0cm = 0.25m

i: current  = 90.0A

You replace the values of the parameters in the equation (1):

The magnetic field in the solenoid is 0.20T

b. The magnetic permeability of air is approximately equal to the magnetic permeability of vacuum. To calculate the energy density in the solenoid you use:

The energy density is 17230.6 J/m³

c. The total energy contained in the solenoid is:

          (2)

V is the volume of the solenoid and is calculated by assuming the solenoid as a perfect cylinder:

A: cross-sectional area of the solenoid = 0.550 cm^2 = 5.5*10^-5m^2

Then, the energy contained in the solenoid is:

The energy contained is 0.236J

d. The inductance of the solenoid is calculated as follow:

The inductance of the solenoid is 5.84*10^-5 H

waves moving from a fast medium to a slow medium will experience a reflection as light travels more slowly than red light. total internal reflection occurs when the critical angle is.

a self-report inventory personality assessment is not very reliable for a psychological test because a patient doing the assessment may exaggerate or under-report in the answers. also, people will tend to be high on desirable behaviors and low on undesirable things.