subject
Physics, 03.07.2020 04:01 ramamullapudi3639

A 50 gram meterstick is placed on a fulcrum at its 50 cm mark. A 20 gram mass is attached at the 12 cm mark. Where should a 40 gram mass be attached so that the meterstick will be balanced in rotational equilibrium

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 00:00
A1000-kg weather rocket is launched straight up. the rocket motor provides a constant acceleration for 16-s, then the motor stops. the rocket altitude 20-s after launch is 510-m. you can ignore any effects of air resistance. a. what was the rocket’s acceleration during the first 16-s? b. what is the rocket’s speed as it passes through a cloud 5100-m above the ground?
Answers: 1
question
Physics, 22.06.2019 00:00
Why is metal often used for cooking pan?
Answers: 2
question
Physics, 22.06.2019 01:30
For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.
Answers: 3
question
Physics, 22.06.2019 23:00
Awelder using a tank of volume 7.50×10^-2 m^3 fills it with oxygen (with a molar mass of 32.0 g/mol ) at a gauge pressure of 3.30×10^5 pa and temperature of 37.1 ∘c. the tank has a small leak, and in time some of the oxygen leaks out. on a day when the temperature is 23.1 ∘c, the gauge pressure of the oxygen in the tank is 2.00×10^5 pa . a) find the initial mass of oxygen. b) find the mass of oxygen that has leaked out.
Answers: 3
You know the right answer?
A 50 gram meterstick is placed on a fulcrum at its 50 cm mark. A 20 gram mass is attached at the 12...
Questions
question
Mathematics, 12.12.2020 16:40
question
Mathematics, 12.12.2020 16:40