Explore In the AC generated illustrated above, a conducting loop rotates in the magnetic field of two permanent magnets. The magnetic field lines fill the gap from north to south. As the loop rotates, the magnetic flux through the loop changes from maximum in a given orientation to zero, then to maximum in the opposite orientation. This produces an induced voltage in the loop that is sinusoidal, where N is the number of turns in the rotating loop (N = 1 in the animation), B is the magnetic field produced by the permanent magnets, A is the area of the rotating loop, and ω is the angular frequency of the rotating loop.4

Explain the consequences of this addiction to the brain tissue

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Ametal ring 4.20 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. these magnets produce an initial uniform field of 1.12 t between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.240 t/s . (a) what is the magnitude of the electric field induced in the ring? (b) in which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?