Physics, 24.04.2020 00:58 lathwkuster

A rectangular coil with 50 turns of conducting wire and a total resistance of 10.0 Ω initially lies in the yz-plane at time t = 0 and rotates about the y-axis with a constant angular speed of 24.0 rad/s. The coil has a height along the y-direction of 0.200 m and a width along the z-direction of 0.100 m. The coil is in the presence of a uniform magnetic field with a magnitude of 1.80 T that points in the +x-direction.

(a) Calculate the maximum induced emf in the coil.
V

(b) Calculate the maximum rate of change of magnetic flux through the coil.
Wb/s

(c) Calculate the induced emf at t = 0.050 0 s.
V

(d) Calculate the torque exerted by the magnetic field on the coil at the instant when the emf is a maximum.
N

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 18:10

Scientists use laser range-finding to measure the distance to the moon with great accuracy. a brief laser pulse is fired at the moon, then the time interval is measured until the "echo" is seen by a telescope. a laser beam spreads out as it travels because it diffracts through a circular exit as it leaves the laser. in order for the reflected light to be bright enough to detect, the laser spot on the moon must be no more than 1.0 km in diameter. staying within this diameter is accomplished by using a special large-diameter laser. part a if λ = 540nm , what is the minimum diameter of the circular opening from which the laser beam emerges? the earth-moon distance is 384,000 km. express your answer to two significant figures and include the appropriate units.

Answers: 1

Answer

Physics, 22.06.2019 02:00

Write the correct abbreviation for each metric unit

Answers: 1

Answer

Physics, 22.06.2019 04:00

Which configuration would produce an electric current? a) rotate a coil of copper wire between two magnets. b) connect a wire between a copper and zinc strip sitting in a beaker of water. c) connect a wire to the (+) positive end of a battery and the other end to a light bulb. d) connect a wire to the negative end of a battery and the other end to a light bulb.

Answers: 2

Answer

Physics, 22.06.2019 07:10

1. how much energy is needed to raise the temperature of 40.0 g of argon from 25c to 40c? the specific heat capacity of argon is 0.520 j/(g·k) 2a. 23.0 ml of 0.100 m hcl (standard) are added from a buret to neutralize 50.0 ml of an unknown basic solution. 2b. if the oh- produced in the previous reaction came from ca(oh)2, then what is the molarity of the ca(oh)2? 3.calculate the new freezing-point of a solution when 60.5 grams of cacl2 solute is dissolved in 0.612 kg of water. 4. what is the maximum number of moles of alcl3 that can be produced from 5.0 mol al and 6.0 mol cl2? 5. a sample of oxygen gas has a volume of 150 ml when its pressure is 0.923 atm. if the pressure is increased to 0.987 atm and the temperature remains constant, what will the new volume be? 6. nitrogen gas in a closed container at a temperature of 100.0 oc and 3.0 atm is heated to 300 oc. what is the pressure of the gas at the higher temperature?

Answers: 3

Answer

You know the right answer?

A rectangular coil with 50 turns of conducting wire and a total resistance of 10.0 Ω initially lies...

Questions