A 10.0-m-long copper wire with cross-sectional area 1.25 × 10–4 m2 is bent into a square loop, and then connected to a 0.25-V battery. The loop is then placed in a uniform magnetic field of magnitude 0.19 T. What is the maximum torque that can act on this loop? The resistivity of copper is 1.70 × 10–8 Ω·m.

The maximum torque that can act on the given loop is 218.3 N.m.

The given parameters;

The resistance of the wire is calculated as follows;

The current flowing in the wire is calculated as follows;

V = IR

The maximum torque that can act on the loop is calculated as;

where;

Thus, the maximum torque that can act on the given loop is 218.3 N.m.

Learn more here:link

Explanation:

Length of copper is L = 10m

Cross sectional area

A = 1.25×10^-4m²

Potential difference V = 0.25V

Magnetic field B = 0.19T

Resistivity ρ = 1.70 × 10^-8 Ω·m.

The resistance of the wire can be calculated using

R = ρL/A

R = 1.70 × 10^-8 × 10/1.25×10^-4

R = 1.36×10^-3 ohms

Using ohms law

v= IR

Then, I = V/R

I = 0.25/1.36×10^-3

I = 183.82 Amps

Maximum torque is give as

τ = NiAB

If the wire form a square

Then each side is L/4 = 10/4 = 2.5m

Then, Area of a square is L²

A = 2.5² = 6.25m²

Number of turn is assume to be 1

N=1

Therefore

τ = 1×183.82×6.25×0.19

τ = 218.29 Nm

mistakes are ok

first thing first of the answer is with technology. second thing second thing is that the big bang theory did not happened u see they say it did but what they dont realize is that like dinasures are still a round they might deny it but they and look at these 12 foot human skelteons they find lets see didnt the bible say something about giants. hope this peace.