Three small objects are arranged along a uniform rod of mass m and length L: one of mass m at the left end, one of mass m at the center, and one of mass 2m at the right end. How far to the left or right of the rod’s center should you place a support so that the rod with the attached objects will balance there?

Awoman stands a distance d from a loud motor that emits sound uniformly in all directions. the sound intensity at her position is an uncomfortable 2.0×10-3 w/m2. at a distance 2.6 times as far from the motor, what are (a) the sound intensity and (b) the sound intensity level relative to the threshold of hearing?

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

Engineers find a new metal that is stronger than steel but much lighter. this material is also significantly cheaper than what is currently used for most aircraft, available in large quantities, and easy to manufacture. the engineers are excited because this new material will lower the costs of buying and operating airplanes for companies. what is probably the best step for the engineers to make next?