Physics, 09.04.2020 09:22 dani3112

A mass on a horizontal surface is connected to the spring and pulled to the right along the surface stretching the spring by 25 cm. if the pulling force exerted on the mass was 80.N, determine the spring constant of the spring.

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 04:50

Describe the function of the endomembrane system? what organelles are involved?

Answers: 3

Answer

Physics, 22.06.2019 08:50

The experiment was repeated many years later but the gases were mixed in a different type of container. a white solid was obtained which was xenon fluoride. predict whether you think 1) krypton and 2) radon will react with fluorine. explain reasons for your predictions

Answers: 3

Answer

Physics, 22.06.2019 10:50

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

Answer

Physics, 22.06.2019 20:30

Aball is thrown from the top of a building with an initial velocity of 21.9 m/s straight upward, at an initial height of 51.6 m above the ground. the ball just misses the edge of the roof on its way down, as shown in the figure. (a) determine the time needed for the ball to reach its maximum height. (b) determine the maximum height. (c) determine the time needed for the ball to return to the height from which it was thrown, and the velocity of the ball at that instant. (d) determine the time needed for the ball to reach the ground. (e) determine the velocity and position of the ball at t = 5.35 s.

Answers: 1

Answer

You know the right answer?

A mass on a horizontal surface is connected to the spring and pulled to the right along the surface...

Questions