Physics, 02.04.2020 01:58 hii4199

How many Calories are available to the birds?

Answers: 2

Show answers

Another question on Physics

Physics, 23.06.2019 05:00

What about a rubber band, can it change its shape? is it a solid?

Answers: 2

Answer

Physics, 23.06.2019 07:00

Calculate the linear momentum of a pickup truck that has a mass of 1000kg, and is traveling eastward at 20 m/s

Answers: 1

Answer

Physics, 23.06.2019 08:10

Aweather forecaster uses doppler radar to predict the track of a storm near the town of meadowlands. when the doppler signal is pointed at the storm from the town's center, the frequencies of the waves appear to be decreasing. what should the weather forecaster predict? a. that the storm will move around the edges of meadowlands without hitting the tosis center o b. that residents should be prepared, because it is impossible to know whether the storm will hit o c. that the storm is moving toward meadowlands and that residents should be prepared d. that the storm is moving away from meadowlands and is not likely to hit the town

Answers: 3

Answer

Physics, 23.06.2019 08:30

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28