Physics, 23.03.2020 18:33 nila49

A face milling operation is used to machine 6.0 mm from the top surface of a rectangular piece of aluminum 300 mm long by 125 mm wide in a single pass. The cutter follows a path that is centered over the workpiece. It has four teeth and is 150 mm in diameter. Cutting speed

Answers: 2

Show answers

Answers

Answer from: hbstanley3

Complete Question

The complete question is shown on the first uploaded image

The machining time is T_m = 0.866minutes

The maximum metal removal rate is $R_{mr} =4812.75mm^3 /sec$

Explanation:

From the question we are told that

The length of the work piece is L =300mm

The width of the work piece is W = 125mm

The cut Depth is D = 6mm

The chip load is f = 0.27 mm/tooth

The number of teeth is n = 4

The cutting speed is v = 2.8m/s = 2800mm/s

Now in order to obtain the actual machining time to make the pass across the surface

We first obtain the speed of rotation of the machine

The cutting velocity is mathematically represented as

$v = \pi d N$

Where d is the diameter given as 150mm

N is the speed of rotation

Making N the subject of the formula

$N =\frac{v}{\pi *d}$

$= \frac{2800}{\pi *150 }$

= 5.941rev/sec

Next we need to obtain the feed rate this is mathematically represented as

f_r = N nf

Substituting the values accordingly

= 5.94 * 4 * 0.27

= 6.417 mm/s

The displacement of the milling operation is mathematically represented as

$A = 0.5(d - \sqrt{d^2 - W^2} )$

$= 0.5(150 - \sqrt{150^2 - 125^2} )$

= 0.5 * (150 - 82.9)

= 33.5mm

The machining time is mathematically represented as

$T_m = \frac{(L + A)}{f_r}$

$= \frac{(300 +33.5)}{6.417}$

$=\frac{51.97}{60} = 0.866min$

The maximum metal removal rate is mathematically represented as

$R_{mr} = W D f_r$

Substituting values accordingly

= 125 * 6* 6.417

= 4812.75 mm^3/sec

A face milling operation is used to machine 6.0 mm from the top surface of a rectangular piece of al

Answer from: Quest

the small 0.38-kg slider is known to move from position a to position b along the vertical-plane slot. determine (a) the work done on the body by its weight and (b) the work done on the body by the spring. the distance r = 0.70 m, the spring modulus k = 154 n/m, and the unstretched length of the spring is 0.53 m

explanation:

-reverse card

Answer from: Quest

radiation

explanation:

heat is transmitted by radiation

Another question on Physics

Physics, 22.06.2019 02:10

Which statement correctly describes the relationship between frequency and wavelength?

Answers: 2

Answer

Physics, 22.06.2019 12:20

Electric field of the earth. the earth has a net electric charge that causes a field at points near its surface equal to 150 n> c and directed in toward the center of the earth. (a) what magnitude and sign of charge would a 60-kg human have to acquire to overcome his or her weight by the force exerted by the earth’s electric field? (b) what would be the force of repulsion between two people each with the charge calculated in part (a) and separated by a distance of 100 m? is use of the earth’s electric field a feasible means of flight? why or why not?

Answers: 2

Answer

Physics, 22.06.2019 13:50

Observations show that interstellar clouds can have almost any shape and

Answers: 1

Answer

Physics, 23.06.2019 00:30

What is the technical name for super glue type adhesives?

Answers: 3

Answer

You know the right answer?

A face milling operation is used to machine 6.0 mm from the top surface of a rectangular piece of al...