Physics, 21.03.2020 06:55 zanna12

Design, analyze, and simulate a DC power supply to provide a nominal DC voltage of 2.4V and be able to supply a load current as large as 25 mA. Assume the power supply is fed from a 120 V (rms) 60 Hz line.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 21:30

Write the equation for momentum, first using symbols for the variables, then using words for the variables.

Answers: 2

Answer

Physics, 22.06.2019 12:00

You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?

Answers: 2

Answer

Physics, 22.06.2019 16:00

Amichelson interferometer operating at a 600 nm wavelength has a 3.02-cm-long glass cell in one arm. to begin, the air is pumped out of the cell and mirror m2 is adjusted to produce a bright spot at the center of the interference pattern. then a valve is opened and air is slowly admitted into the cell. the index of refraction of air at 1.00 atm pressure is 1.00028.how many bright-dark-bright fringe shifts are observed as the cell fills with air?

Answers: 1

Answer

Physics, 22.06.2019 23:30

You have two photos of a person walking. one shows the person at the corner of third and main streets, the other shows the person at the corner of tenth and main streets. there are lampposts at every corner in this town, and the first picture shows it to be 10: 32: 00 exactly. the second picture shows it to be 10: 49: 30. you know three facts: (1) all of the clocks are synchronized; (2) there are exactly 12 equal-sized blocks per kilometer in this town; and (3) the streets that cross main in this area are numbered consecutively, with no interruptions. what is the person’s average speed in kilometers per hour?

Answers: 2

Answer

You know the right answer?

Design, analyze, and simulate a DC power supply to provide a nominal DC voltage of 2.4V and be able...

Questions