The electric motor of a model train accelerates the train from rest to 0.640 m/s in 22.0 ms. The total mass of the train is 680 g. Find the average power delivered to the train during its acceleration

F=19.79N

Explanation:

Force F=m×a, a being the acceleration.

a=dv/dt (speed variation/interval of time)

a=(0.640-0)/22ms=

0.640/0.022=640/22=29.1m/s²

Mass: m=680g=0.68kg

Force: F=0.68×29.1=19.79N

The average power delivered to the train is approximately 6.33 watts

Explanation:

Recall that power is defined as the work done (W) per unit of time (t). That is: Power= W/t

in our case the work done is equal to the change in kinetic energy (no potential energy change involved) based on the Kinetic Energy - Work theorem.

The initial kinetic energy is 0 J (the train was at rest, so its velocity is zero), and the final kinetic energy of the system is:

Then the power delivered in 22 milliseconds (which is the same as 0.022 sec) would be:

diagram is missing, but i will try to explain your doubt.

answer:

amplitude is the maximum displacement or distance moved on a point of a vibrating body or wave measured from its equilibrium position.it is equal to half the length of vibration path.

hello, i am papaguy.

i have found an answer to your question but use it as information.

information: because weak acids/bases have low concentration of hydrogen ions, the addition of water has a large impact on the ph. 2. a difference in 1 unit is a 10x difference in concentration for example; a liquid with ph of 3 is 10x more acidic than a liquid with a ph of 4. therefore, a liquid with a ph of 3 is stronger.

best of luck!