A particle with charge q is located at x 5 2R, and a particle with charge 22q is located at the origin. Prove that the equipotential surface that has zero potential is a sphere centered at (24R/3, 0, 0) and having a radius r 5 2 3

Two identical small charged spheres are a certain distance apart, and each one initially experiences an electrostatic force of magnitude f due to the other. with time, charge gradually leaks off of both spheres. when each of the spheres has lost half its initial charge, the magnitude of the electrostatic force will be

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?