The heat flux that is applied to one face of a plane wall is q″ = 20 W/m2. The opposite face is exposed to air at temperature 30°C, with a convection heat transfer coefficient of 20 W/m2 · K. The surface temperature of the wall exposed to air is measured and found to be 50°C. Do steady-state conditions exist? If not, is the temperature of the wall increasing or decreasing with time?

400 W/m^2 and 31℃

Explanation:

The output heat flux q"= 20 W/m^2 (geven)

The output heat flux from.the wall to the air by convection

q"conv = h(ts - t∞)

q"conv = 20(50-30) = 400 W/m^2

Therefor, this case is unsteady and the wall temperature changes with time till the energy balance exist.

ENERGY BALANCE

The input energy must be equal to the output energy for steady state condition. If not the state will be unstaidy or transient.

2. Its noticed that the output heat flux is not that the I put heat flux, therefore the wall tempers will be decreased till the output heat flux is reduced to the value of the given input heat flux

T steady = T∞ +q"/h

= 30 + 20/20 = 31℃

c, 1a hope this