A mass of 1.8 kg of air at 120 kPa and 34°C is contained in a gas-tight, frictionless piston–cylinder device. The air is now compressed to a final pressure of 600 kPa. During the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. Calculate the work input during this process. The gas constant of air is R = 0.287 kJ/kg. K [Tcr = 132.5 K, Pcr = 3.77 MPa]

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

Athird point charge q3 is now positioned halfway between q1 and q2. the net force on q2 now has a magnitude of f2,net = 5.861 n and points away from q1 and q3. what is the value (sign and magnitude) of the charge q3?

When a pendulum is held high and taut and then is released, the pendulum begins to swing. what’s the correct order of the energy transformations in this example? (pe stands for potential energy.)