In a random sample of 200 students from Northern State University, 150 said that they own an Therefore, probably at least 50% of the students at Northern State own an iPod.

a. False cause.
b. Missing the point.
c. Hasty generalization.
d. No fallacy.
e. Composition.

No fallacy

Explanation:

The statement that at least  50% of the students at Northern State own an iPod is best categorized as no fallacy.

This statement is very true and consistent with the facts presented in the passage.

A fallacy is a mistaken belief usually based on biased arguments.

Total number of students sampled = 200

Number of iPod owners = 150

Percentage of iPod owners = x 100

Percentage of iPod owners = x 100 = 75%

We see that it is consistent to say that at least, 50% of the students in the sample are iPod owners.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).