Physics, 10.03.2020 00:44 liqliq223

At time t=0 a grinding wheel has an angular velocity of 23.0 rad/s . It has a constant angular acceleration of 26.0 rad/s² until a circuit breaker trips at time t = 1.60 s. From then on, the wheel turns through an angle of 436 rad as it coasts to a stop at constant angular deceleration.
a) Through what total angle did the wheel turn between t= 0 and the time it stopped? answer in rad
b) At what time does the wheel stop? (secs)
c) What was the wheel's angular acceleration as it slowed down?
Express your answer in radians per second per second.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 06:30

The energy of a photon was found to be 3.38 × 10–19 j. planck’s constant is 6.63 × 10–34 j • s. which color of light corresponds to this photon?

Answers: 2

Answer

Physics, 22.06.2019 19:40

12. a body is a particular amount of matter. it can be a solid, liquid or gas. it can be described as existing in a. size and shape. b. motion and force c. time and space. d. location and movement.

Answers: 2

Answer

Physics, 22.06.2019 20:10

Two cannon balls weighing 18 kg and 24 kg are chained together and fired horizontally with a velocity of 165 m/s from the top of a 21-m wall. the chain breaks during the flight of the cannonballs and the 18-kg cannonball strikes the ground at t = 1.5 s, at a distance of 240 m from the foot of the wall, and 7 m to the right of the line of fire. determine the position of the other cannonball at that instant. neglect the resistance of the air.

Answers: 1

Answer

Physics, 22.06.2019 21:40

Ahair dryer is basically a duct in which a few layers of electric resistors are placed. a small fan pulls the air in and forces it through the resistors where it is heated. air enters a 1200 w hair dryer at 100 kpa and 22°c and leaves at 47°c. the cross-sectional area of the hair dryer at the exit is 60 cm2. neglecting the power consumed by the fan and the heat losses through the walls of the hair dryer, determine (a) the volume flow rate of air at the inlet and (b) the velocity of the air at the exit.

Answers: 1

Answer

You know the right answer?

At time t=0 a grinding wheel has an angular velocity of 23.0 rad/s . It has a constant angular accel...

Questions