Physics, 07.03.2020 03:46 irlanda20

Jim is driving a 2268 kg pickup truck at 15.0 m/s and releases his foot from the accelerator pedal. The car eventually stops due to an effective friction force that the road, air, and other things exert on the car. The friction force has an average magnitude of 900 N.
A. Determine the initial kinetic energy of the truck.
B. Determine the stopping distance of the truck.
C. Determine the average acceleration while stopping of the truck.
D. Determine the coefficient of kinetic friction between tire and surface.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 19:00

Find the momentum for a 2.6-kg brick parachuting straight downward at a constant speed of 8.4 m/s .

Answers: 3

Answer

Physics, 21.06.2019 20:40

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Answers: 3

Answer

Physics, 21.06.2019 22:00

What is the fate of the electrons that interact with a specimen in an electron microscope?

Answers: 1

Answer

Physics, 22.06.2019 01:30

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Answers: 3

Answer

You know the right answer?

Jim is driving a 2268 kg pickup truck at 15.0 m/s and releases his foot from the accelerator pedal....

Questions