A composite plane wall consists of a Li = 50 mm thick layer of insulation (ki = 0.05 W/m·K) and a Ls = 25 mm thick layer of siding (ks = 0.10 W/m·K). The inner temperature of the insulation is 25oC. The outer temperature of the siding is -10oC. Steady state conditions apply. Determine the temperature at the interface between the two layers, in oC, and the rate of heat transfer through the wall, in W per m2 of surface area.

Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.

If 21.2 kcals of energy is released by this reaction, how many kj does the reaction release? (1 cal 4.184 j)

Will give brainliest! jay rides his 2.0-kg skateboard. he is moving at speed 5.8 m/s when he pushes off the board and continues to move forward in the air at 5.4 m/s. the board now goes forward at 13 m/s.a. determine jay’s mass.b. determine the change in the internal energy of the system during this process.(express your answer to two significant figures and include the appropriate units.)