A object with mass m=1.0kg is rotating around a axis, with a constant angular speed omega=6.28rad/s. The radius of the circular motion is 2.0m. What is the: (1) tangential speed;(2)centrapital force; and (3) period?

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

Match these items. 1. coulombs __force 2. ohms __emf 3. centimeters __resistance 4. newtons __charge 5. volts __length

I) a gas contained within a piston-cylinder assembly undergoes two processes, a and b, between the same end states, 1 and 2, where p1 = 10 bar, v1 = 0.1 m3 , u1 = 400 kj and p2 = 1 bar, v2 = 1.0 m3 , u2 = 200 kj: ' process a: process from 1 to 2 during which the pressure-volume relation is pv = constant. ' process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to state 2. kinetic and potential energy effects can be ignored. for each of the processes a and b, a) sketch the process on a p-v diagram. b) evaluate the work, in kj. c) evaluate the heat transfer, in kj.(ans : qb,12 = -65.0 kj)