subject
Physics, 14.02.2020 22:24 LHawk35531

Water in a tank is pressurized by air and pressure measured using a multi-fluid manometer. Determine the gage pressure of air in the tank if h1 = 20 cm, h2 = 30 cm, h3 = 46 cm. Given r for water, oil and Hg to be 1000 kg/m3, 800 kg/m3, and 13, 600 kg/m3, respectively.

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 17:20
If the force on an object is in the negative direction, the work it does on the object must be [2 points a) negative. b) positive c) the work could be either positive or negative, depending on the direction the object moves
Answers: 1
question
Physics, 22.06.2019 05:20
Very large accelerations can injure the body, especially if they last for a considerable length of time. one model used to gauge the likelihood of injury is the severity index ( ), defined as =/ . in the expression, is the duration of the accleration, but is not equal to the acceleration. rather, is a dimensionless constant that = the number of multiples of that the acceleration is equal to.in one set of studies of rear-end collisions, a person's velocity increases by 13.7 km/h with an acceleration of 36.0 m/s2 . let the + direction point in the direction the car is traveling. what is the severity index for the collision?
Answers: 1
question
Physics, 22.06.2019 05:30
James is trying to prove newton's 2nd law of motion. he tries to move four different objects with different masses, shapes, and sizes from point a to point b. the objects are a toy car, a car, a refrigerator, and a kitchen table. after some experimentation, he finds that force is dependent on the mass of the object, rather than it's size or shape. the object that takes the most force to move is the
Answers: 1
question
Physics, 22.06.2019 15:20
Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2
Answers: 2
You know the right answer?
Water in a tank is pressurized by air and pressure measured using a multi-fluid manometer. Determine...
Questions