A skydiver of mass 80.0 kg (including parachute) jumps off a plane and begins her descent. Throughout this problem use 9.80 m/s2 for the free-fall acceleration.
a. At some point during her free fall, the skydiver reaches her terminal speed. What is the magnitude of the drag force Fdrag due to air resistance that acts on the skydiver when she has reached terminal speed?
b. For an object falling through the air at a high-speed v, the drag force acting on it due to air resistance can be expressed as
F=Kv2
where the coefficient K depends on the shape and size of the falling object and on the density of air. For a human body, the numerical value for K is about 0.250 kg/m.
Using this value for K, what is the terminal speed vterminal of the skydiver?
c. When the skydiver descends to a certain height above the ground, she deploys her parachute to ensure a safe landing. Usually the parachute is deployed when the skydiver reaches an altitude of about 900 m (3000 ft). Immediately after deploying the parachute, does the skydiver have a nonzero acceleration?
d. When the parachute is fully open, the effective drag coefficient of the skydiver plus the parachute increases to 60.0 kg/m . What is the drag force Fdrag acting on the skydiver immediately after she has opened the parachute?
e. What is the terminal speed vterminal of the skydiver when the parachute is opened?

The drag force is the force that opposes relative motion in a fluid

The calculated values terminal velocity and drag force of the skydiver are;

a. The drag force is 784 Newtons

b. The terminal speed is 56 m/s

c. Yes

d. Immediately the parachute is opened, the drag force is 188,160 Newtons

e. When the parachute is opened, the terminal speed of the skydiver is approximately 3.615 m/s

The reason the above values are correct is as follows:

The known parameters are;

A skydiver jumps off a plane

The mass of the skydiver, m = 80.0 kg

The free-fall acceleration, g = 9.80 m/s²

a. Required:

The magnitude of the drag force when she reaches her terminal speed

Solution;

At the terminal speed, the acceleration is zero, and she is in uniform motion, from which according to Newton's first law of motion, the net force is zero  therefore;

The downward force due to weight is equal to the upward force due to drag which gives;

The drag force, = The weight of the skydiver, W = m × g

= 80.0 kg × 9.80 m/s² = 784 N

The drag force, = 784 Newtons

b. Required:

The value of the terminal speed

Solution:

The given equation for the drag force is F = K·v²

Where;

K = The shape and size of the object and density factor = 0.250 kg/m

v = The speed with which the object falls

At the terminal speed, , we have;

F = = K × ²

From part a., we have;

F = = 784 N

Which gives;

∴ 784 = 0.250 × ²

= √(784/0.250) = 56

The terminal speed, = 56 m/s

c. Required:

Whether or not the the skydiver has a non zero acceleration

Solution:

Yes, when the parachute is deployed, the drag force is increased and therefore, the velocity of the skydiver and the parachute combined is reduced , therefore, the acceleration changes becoming nonzero

d. Required:

The value of the drag force acting on the skydiver immediately after she has opened the parachute

Solution;

The given value of the drag coefficient, K = 60.0 kg/m

Immediately the parachute is opened while the skydiver is moving at the initial terminal speed of v = 56 m/s, we have;

Drag force, F = 60.0 kg/m × (56 m/s)² = 188.160 KN

The drag force, immediately the parachute is opened F = 188.160 KN

e. Required:

The value of new terminal speed with the parachute opened

Solution:

From the equation for the drag force, F = K·v², where k = 60.0 kg/m, we have;

At the terminal speed, F = = 784 N

Therefore, at the terminal speed, , we have;

= K·²

784 = 60.0 × ²

= √((784 N)/(60.0 kg/m)) ≈ 3.615 m/s

The terminal speed of the skydiver when the parachute is opened, ≈ 3.615 m/s

Learn more about drag force here:

link

i'm just gonna leave this comment here, so i can get a challange done-

explanation:

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water