subject
Physics, 06.02.2020 02:42 jermainedwards

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 22:00
In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?
Answers: 2
question
Physics, 22.06.2019 04:50
The position of a crate sliding down a ramp is given by x=(0.05t^3) m, y=(1.7t^2) m, z=(6−0.85t^5/2) m, where t is in seconds. (a) determine the magnitude of the crate's velocity when t = 2 s. (b) determine the magnitude of the crate's acceleration when t = 2 s.
Answers: 2
question
Physics, 23.06.2019 00:30
What os the equation of the line described below written in slope-intercept form? the line passing through point (0,0) and parallel to the line whose equation is 3x+2y-6=0
Answers: 3
question
Physics, 23.06.2019 13:30
It is necessary to determine the specific heat of an unknown object. the mass of the object is 201.0g it is determined experimentally that it takes 15j to raise the temperature 10°c. what is the specific heat of the object? 3,020,000 j/kg ∙ k 1500 j/kg ∙ k 0.00130 j/kg ∙ k 7.46 j/kg ∙ k
Answers: 3
You know the right answer?
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity...
Questions
question
Biology, 13.10.2020 14:01
question
Computers and Technology, 13.10.2020 14:01