What are (a) the charge and (b) the charge density on the surface of a conducting sphere of radius 0.20 m whose potential is 240 v (with v = 0 at infinity )?

Abearing is designed to a reduce friction b. support a load c.guide moving parts such as wheels, shafts and pivots d. all of the above

What is the mass of the same rock on the earth

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)