A2.00-kg, frictionless block is attached to an ideal spring with force constant 300 n/m. at t=0 the block has velocity -4.00 m/s and displacement +0.200 m.
find:
(a) the amplitude and (b) the phase angle.
c) write an equation for the position as a function of time.
assume x(t) in meters and t in seconds

The position of a dragonfly that is flying parallel to the ground is given as a function of time by r⃗ =[2.90m+(0.0900m/s2)t2]i^− (0.0150m/s3)t3j^. a: at what value of t does the velocity vector of the insect make an angle of 34.0 degree clockwise from the x-axis? b: at the time calculated in part (a), what is the magnitude of the acceleration vector of the insect? c : at the time calculated in part (a), what is the direction of the acceleration vector of the insect?

11. you want to calculate the displacement of an object thrown over a bridge. using -10 m/s2 for acceleration due to gravity, what would be the total displacement of the object if it took 8 seconds before hitting the water?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)