subject
Physics, 03.01.2020 01:31 sofyan00404

In a typical system design specification, the section describes the constraints, or conditions, affecting a system, including any requirements that involve operations, hardware, systems software, or security. executive summary time and cost estimates implementation requirements system environment.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 16:30
In raising a 6200-n piano with a pulley system, the movers note that, for every 2.2 m of rope pulled down, the piano rises 0.12 m . ideally, find the force required to lift the piano.
Answers: 2
question
Physics, 21.06.2019 18:30
A6,600 kg train car moving at +2.0 m/s bumps into and locks together with one of mass 5,400kg moving at -3.0m/s. what is their final velocity? +0.50 m/s -1.0 m/s +2.5 m/s -0.25 m/s
Answers: 3
question
Physics, 22.06.2019 02:00
Askydiver weighing 140 lb (including equipment) falls vertically downward from an altitude of 19,000 ft and opens the parachute after 18 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.55|v| when the parachute is closed and is of magnitude 14|v| when the parachute is open, where the velocity v is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. (a) find the speed of the skydiver when the parachute opens. (b) find the distance fallen before the parachute opens. (c) what is the limiting velocity vl after the parachute opens? (d) determine how long the sky diver is in the air after the parachute opens. (e) plot the graph of velocity versus time from the beginning of the fall until the skydiver reaches the ground.
Answers: 1
question
Physics, 23.06.2019 23:20
Four identical lab carts each have a mass of 200kg. different masses are added to the carts and the velocities are measured. all carts move to the right. which cart has the greatest momentum. cart a cart b cart c cart d
Answers: 3
You know the right answer?
In a typical system design specification, the section describes the constraints, or conditions, aff...
Questions
question
Mathematics, 27.07.2019 01:00