Pumping apparatus driver/operators must be familiar with the different types of nozzles carried on their apparatus. how would a particular type of nozzle being used affect the hydraulic calculations that must be performed by the driver/operator?

Ahot-air balloon is drifting straight downward with a constant speed of 2.40 m/s. when the balloon is 7.63 m above the ground, the balloonist decides to drop one of the ballast sandbags to the ground below. how much time elapses before the sandbag hits the ground?

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Why do different substances have diffrent properties