Astring (with uniform mass density) is attached to a wave generator with variable frequency to create standing wave patterns. the string goes over a pulley and is connected to a mass (which can be varied) to create tension in the string. mass on a string over pulley 1) if the frequency is changed (while the mass is held fixed), what else will change?

An uncharged nonconductive hollow sphere of radius 18.0 cm surrounds a 12.0 µc charge located at the origin of a cartesian coordinate system. a drill with a radius of 1.00 mm is aligned along the z axis, and a hole is drilled in the sphere. calculate the electric flux through the hole.

In a stagnant pool of water, a crayfish may spend much of its time lying with one side of its carapace near the surface of the water. in this position, it will move the walking legs on that side in a rhythmic back-and-forth motion. explain the likely function of this behavior.

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.