subject
Physics, 17.12.2019 06:31 vazquezemmy8

Rod ab is made of a mild steel that is assumed to be elastoplastic with e = 200 gpa and σy = 345 mpa. after the rod has been attached to the rigid lever cd, it is found that end c is 6 mm too high. a vertical force q is then applied at c until this point has moved to position c0 . determine the required magnitude of q and the deflection δ1 if the lever is to snap back to a horizontal position after q is removed. hint: "elastoplastic" means that rod ab is permanently deformed, and will not spring back to totally undeformed.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 23:10
What happens in a global convection cell
Answers: 1
question
Physics, 22.06.2019 00:30
What is relative velocity? in which condition is relative velocity known by adding the velocity of the first body and that of the second body
Answers: 1
question
Physics, 22.06.2019 06:10
Africtionless piston-cylinder contains 50 l of saturated liquid r-134a. the piston has a mass and an area resulting in an applied pressure of 500 kpa on the refrigerant. the refrigerant is now heated until its temperature rises to 70∘c. calculate the work (in kj) done during this process.
Answers: 3
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
You know the right answer?
Rod ab is made of a mild steel that is assumed to be elastoplastic with e = 200 gpa and σy = 345 mpa...
Questions