Physics, 07.12.2019 10:31 sierravick123owr441

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.
also determine the speed of the box after traveling the specified distance.
7.9 n
μ= 0.28
1.5 kg

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.

Answers: 1

Show answers

Answers

Answer from: vlarocca17

1. A force of 25.0 Newtons is applied so as to move a 5.0 kg mass a distance of 20.0 meters. How much work was done?
Ans. W = F × d = 25 N × 20.0 m = 50 J
2. A force of 120 N is applied to the front of a sled at an angle of 28.0 above the horizontal so as to pull the sled a distance of 165 meters. How much work was done by the applied force?
Ans. W = F •d cos  = 120 N • 165 m cos 28.0 = 17,482.36 J
3. A sled, which has a mass of 45.0 kg., is sitting on a horizontal surface. A force of 120 N is applied to a rope attached to the front of the sled such that the angle between the front of the sled and the horizontal is 35.0o. As a result of the application of this force the sled is pulled a distance of 500 meters at a relatively constant speed. How much work was done to this sled by the applied force?
Ans. W = F• d cos  = 120 N • 500 m • cos 35.0 = 49,149.12 N
4. A rubber stopper, which has a mass of 38.0 grams, is being swung in a horizontal circle which has a radius of R = 1.35 meters. The rubber stopper is measured to complete 10 revolutions in 8.25 seconds.
a. What is the speed of the rubber stopper?
Ans. v =  v = •  v = .•(. ) v = 10.29 m/s .
b. How much force must be applied to the string in order to keep this stopper moving in this circular path at a constant speed?
Ans. The Centripetal Force, Fc = • = . • (. /)= 29.76 N .
c. How far will the stopper move during a period of 25.0 seconds?
Ans. d = vt = 10.29 m/s25 s = 257.25 m
d. How much work is done on the stopper by the force applied by the string during 25.0 seconds?
Ans. 0 J. The force is towards the center and the distance is around the perimeter of the circle. They are at right angles to each other. For work to be done, the force has to be in the same direction as the displacement.
5. How much work would be required to lift a 12.0 kg mass up onto a table 1.15 meters high?
Ans. W = F• d = mg d = 12 kg  9.8 m/s2  1.15 m = 135.24 J

Answer from: Quest

0.93xc=0.93x3x10^8m/s

2.54cm is 1 inch

360seconds i 1 hr

Answer from: Quest

there are no atoms

Another question on Physics

Physics, 22.06.2019 06:00

An ideal gas is held in a container at constant volume. initially, its temperature is 5 degrees c and its pressure is 1.2 atm. what is its pressure when its temperature is 43 degrees c? answer in units of atm

Answers: 2

Answer

Physics, 22.06.2019 10:50

If jerome is swinging on a rope and transferring energy from gravitational potential energy to kinetic energy, is being done.

Answers: 3

Answer

Physics, 22.06.2019 11:30

If the textbook weighs 19.6 newtons on venus,what is the strength of gravity on venus?

Answers: 1

Answer

Physics, 22.06.2019 16:00

Fill in the blanks with the numbers is a measure of the resistance to flow. a high liquid has a high resistance to flow and flows slowly. the ancients thought everything in the world was made of 4 we now know that there are 94 naturally occurring and scientists have created another 24 i am certain they will create even more. honey flows slowly because it has a high to flowing. a can be separated by physical means because it contains more than one pure substance and 2 pure substances are not chemically bonded to each other. a cannot be separated by physical means. all matter is made up of all elements are with the same number of protons. if it is just a single or many bonded together, if all of them have the same number of protons, it is an element. in a piece of pure iron metal, all the are joined together, that piece of iron metal is called elemental iron. a single of iron is called elemental iron. a mixture has differences from place to place. we might need a microscope to see them or they might be obvious to the unaided eye. there are surfaces separating it into different phases. a mixture is the same everywhere. it is uniform. there are no surfaces separating it into different phases. if different kinds of atoms (different elements) are bonded together by their electrons, it is called a there are physical means of to isolate the different pure substances in a mixture and there are chemical means of to isolate the different elements in a compound. 1. element 2. compound 3. mixture 4. heterogeneous 5. homogeneous 6. pure substance 7. atoms 8. separation 9. viscosity 10. resistance

Answers: 3

Answer

You know the right answer?

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.
...

Questions