Two coils are wound around the same cylindrical form. when the current in the first coil is decreasing at a rate of -0.245 a/s , the induced emf in the second coil has a magnitude of 1.60×10−3 v .part apart completewhat is the mutual inductance of the pair of coils? mm= 6.53×10−3 hprevious answerscorrectpart bpart completeif the second coil has 20 turns, what is the flux through each turn when the current in the first coil equals 1.25 a ? φφ= 4.08×10−4 wbprevious answerscorrect

freezing

deposition

condensation

explanation;

melting also called fusion is the process where solid becomes liquid, sublimation is the process where solid becomes gaseous without first changing to liquid, deposition involves change from gaseous to solid state, freezing involves change from liquid to solid, boiling or evaporation involves change of liquid to gaseous state, while condensation is the change from gaseous state to liquid state.

endothermic reactions involves absorption of heat from the surroundings or the environment while exothermic reactions involves loss of heat energy to the surroundings.

in this case, sublimation, evaporation and melting are endothermic reactions (gain energy from the environment) while, freezing, deposition and condensation are exothermic (loss of energy to the surroundings) reactions.

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water