Response 3: using what you have determined to be the best method, develop a unique example (not posted on the discussion board by anyone else) and calculate the resultant displacement between two points when there are two legs or distinct parts to the trip. include the displacement of each leg of the trip as well as the resultant displacement of the entire trip.
don't forget: include both the direction and the magnitude as part of the displacement.

i will give a brainliest!

What type of electromagnetic wave is used in security pens? a. x-rays c. microwaves b. visible light d. ultraviolet radiation select the best answer from the choices provided

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Aforce of 9.00 newtons acts at an angle of 19.0 to the horizontal. what is its component in the horizontal direction?