Physics, 27.11.2019 06:31 windmadness5331

A10 g particle undergoes shm with an amplitude of 2.0 mm and a maximum acceleration of magnitude 8.0 multiplied by 103 m/s2, and an unknown phase constant ) what is the period of the motion? 1 s(b) what is the maximum speed of the particle? 2 m/s(c) what is the total mechanical energy of the oscillator? 3 j(d) what is the magnitude of the force on the particle when the particle is at its maximum displacement? 4 n(e) what is this force when the particle is at half its maximum displacement? 5 n

Answers: 3

Show answers

Answers

Answer from: jonmorton159

a) T=0.0031416s

b) $v_{max}=6.283\frac{m}{s}$

c) E=0.1974J

d) F=80N

e) F=40N

Explanation:

1) Important concepts

Simple harmonic motion is defined as "the motion of a mass on a spring when it is subject to the linear elastic restoring force given by Hooke's Law (F=-Kx). The motion experimented by the particle is sinusoidal in time and demonstrates a single resonant frequency".

2) Part a

The equation that describes the simple armonic motion is given by $X=Acos(\omega t +\phi)$ (1)

And taking the first and second derivate of the equation (1) we obtain the velocity and acceleration function respectively.

For the velocity:

$\frac{dX}{dt}=v(t)=-A\omega sin(\omega t +\phi)$ (2)

For the acceleration

$\frac{d^2 X}{dt}=a(t)=-A\omega^2 cos(\omega t+\phi)$ (3)

As we can see in equation (3) the acceleration would be maximum when the cosine term would be -1 and on this case:

$A\omega^2=8x10^{3}\frac{m}{s^2}$

Since we know the amplitude A=0.002m we can solve for $\omega$ like this:

$\omega =\sqrt{\frac{8000\frac{m}{s^2}}{0.002m}}=2000\frac{rad}{s}$

And we with this value we can find the period with the following formula

$T=\frac{2\pi}{\omega}=\frac{2 \pi}{2000\frac{rad}{s}}=0.0031416s$

3) Part b

From equation (2) we see that the maximum velocity occurs when the sine function is euqal to -1 and on this case we have that:

$v_{max}=A\omega =0.002mx2000\frac{rad}{s}=4\frac{m rad}{s}=4\frac{m}{s}$

4) Part c

In order to find the total mechanical energy of the oscillator we can use this formula:

$E=\frac{1}{2}mv^2_{max}=\frac{1}{2}(0.01kg)(6.283\frac{m}{s})^2=0.1974J$

5) Part d

When we want to find the force from the 2nd Law of Newton we know that F=ma.

At the maximum displacement we know that X=A, and in order to that happens $cos(\omega t +\phi)=1$ , and we also know that the maximum acceleration is given by::

$|\frac{d^2X}{dt^2}|=A\omega^2$

So then we have that:

$F=ma=mA\omega^2$

And since we have everything we can find the force

$F=ma=0.01Kg(0.002m)(2000\frac{rad}{s})^2 =80N$

6) Part e

When the mass it's at the half of it's maximum displacement the term $cos(\omega t +\phi)=1/2$ and on this case the acceleration would be given by;

$|\frac{d^2X}{dt^2}|=A\omega^2 cos(\omega t +\phi)=A\omega^2 \frac{1}{2}$

And the force would be given by:

$F=ma=\frac{1}{2}mA\omega^2$

And replacing we have:

$F=\frac{1}{2}(0.01Kg)(0.002m)(2000\frac{rad}{s})^2 =40N$

Answer from: Quest

jupiter is the largest planet in our solar system, having a mass and radius that are respectively, 318 and 11.2 times that of earth. suppose that an object falls from rest near the surface of each planet and that the acceleration due to gravity remains constant during the fall. each object falls the same distance before striking the ground. determine the ratio of the time of fall on jupiter to that on earth.

Answer from: Quest

Go to the bathroom and vape

Another question on Physics

Physics, 22.06.2019 00:00

What should the power status of a circuit be when measuring resistance with an ohmmeter?

Answers: 2

Answer

Physics, 22.06.2019 10:50

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

Answer

Physics, 22.06.2019 19:30

What you see with your eyes is a form of energy. a. light b. heat c. chemical d. electrical

Answers: 2

Answer

Physics, 22.06.2019 22:20

The starship enterprise is caught in a time warp and spock is forced to use the primitive techniques of the 20th century to determine the specific heat capacity of an unknown mineral. the 125-g sample was heated to 96.3°c and placed into a calorimeter containing 85.9 g of water at 20.0°c. the heat capacity of the calorimeter was 14.2 j/k. the final temperature in the calorimeter was 24.5°c. what is the specific heat capacity (in j/g°c) of the mineral? enter to 4 decimal places.

Answers: 1

Answer

You know the right answer?

A10 g particle undergoes shm with an amplitude of 2.0 mm and a maximum acceleration of magnitude 8.0...

Questions