Awheel is turning about an axis through its center with constant angular acceleration. starting from rest, at t = 0, the wheel turns through 8.20 revolutions in 12.0 s. at t = 12.0 s the kinetic energy of the wheel is 36.0 j. for an axis through its center, what is the moment of inertia of the wheel?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

What characteristics of hv2112 make it the best candidate to be classified as a thorne-zytkow object?

A10-kg piece of aluminum sits at the bottom of a lake, right next to a 10-kg piece of lead, which is much denser than aluminum. which one has the greater buoyant force on it? explain. b - the aluminum a) both have the same buoyant force. b) the aluminum c) the lead d) it cannot be determined without knowing their volumes.