Physics, 19.11.2019 18:31 Jesseniapacheco31

Ahigh-speed flywheel in a motor is spinning at 500 rpm when a power failure suddenly occurs. the flywheel has mass 40.0 kg and diameter 75.0 cm. the power is off for 30.0 s, and during this time the flywheel slows due to friction in its axle bearings. during the time the power is off, the flywheel makes 200 complete revolutions.
(a) at what rate is the flywheel spinning when the power comes back on?
(b) how long after the beginning of the power failure would it have taken the flywheel to stop if the power had not come back on, and how many revolutions would the wheel have made during this time?

Answers: 1

Show answers

Answers

Answer from: robrod75

The final angular speed of the flywheel before the power comes back on is 31.43 rad/s.

The time taken for the flywheel to stop if the power had not come back is 75 s.

The number of revolutions the wheel would have made during this time is 312.5 revolutions.

The given parameters;

initial angular speed of the wheel, $\omega _i$ = 500 rpmmass of the flywheel = 40 kgdiameter of the flywheel, d = 75 cmtime, t = 30 snumber of revolution of the flywheel, N = 200

The angular acceleration of the wheel is calculated as follows;

$\theta = \omega _i t + \frac{1}{2} \alpha t^2\\\\(200\ rev \times\frac{2 \pi \ rad}{1 \ rev} ) = (500 \ \frac{rev}{\min} \times \frac{2 \pi \ rad}{1 \ rev} \times \frac{1\min}{60 \ s})(30 \ s) \ + \ \frac{1}{2} (30 \ s)^2 (\alpha )\\\\1256.8 = 1571 + 450 \alpha \\\\450 \alpha = 1256.8 - 1571\\\\450 \alpha = -314.2\\\\\alpha = \frac{-314.2}{450} \\\\\alpha = -0.698 \ rad/s^2$

(a) The final angular speed of the flywheel is calculated as follows;

$\omega_f = \omega _i \ + \ \alpha t\\\\\omega _f = (500 \ \frac{rev}{1\min} \times \frac{2\pi \ rad }{1 \ rev} \times \frac{1 \min}{60 \ s} ) \ + \ (-0.698\times 30)\\\\\omega_f = 52.37 \ - \ 20.94\\\\\omega _f = 31.43 \ rad/s$

(b) The time taken for the flywheel to stop if the power had not come back, is calculated as follows;

$\omega_f = \omega _i + \alpha t\\\\0 = 52.37 - (0.698t)\\\\0.698t = 52.37\\\\t = \frac{52.37}{0.698} \\\\t = 75 \ s$

The number of revolutions the wheel would have made during this time is calculated as follows;

$\theta = (\frac{\omega _i + \omega _f}{2} )t\\\\\theta = (\frac{52.37 + 0}{2} )75\\\\\theta = 1963.875 \ rad\\\\\theta = \frac{1 \ rev}{2\pi \ rad} \times 1963.875 \ rad\\\\\theta = 312.5 \ rev$

Learn more here:link

Answer from: briannabridgewater01

Part a)

$\omega_f = 31.4 rad/s$

$\omega_f = 300 rpm$

Part b)

t = 75 s

N = 311.5 revolutions

Explanation:

Initial speed of the flywheel is given as

f_1 = 500 rpm

initial angular speed is given as

$\omega_i = 2\pi(\frac{500}{60})$

$\omega_i = 52.35 rad/s$

Number of revolutions

N = 200

angular displacement is given as

$\theta = 2N\pi$

$\theta = 2(200)\pi = 1256.6 rad$

now we have

$\theta = \omega_i t + \frac{1}{2}\alpha t^2$

$1256.6 = 52.35(30) + \frac{1}{2}\alpha (30)^2$

$\alpha = -0.7 rad/s^2$

Part a)

final angular speed of the wheel is given as

$\omega_f = \omega_i + \alpha t$

$\omega_f = 52.35 - 0.7(30)$

$\omega_f = 31.4 rad/s$

$\omega_f = 300 rpm$

Part b)

If the final angular speed becomes zero then time taken by the wheel is given as

$\omega_f - \omega_i = \alpha t$

0 - 52.35 = -0.7 t

t = 75 s

Now total number of revolution that it makes is given as

$N = \frac{\omega_f + \omega_i}{4\pi} t$

$N = \frac{52.35 + 0}{4\pi} (75)$

N = 311.5 revolutions

Answer from: Quest

answer: a) y=-8x+5

a) m= -8

b) m= -2

c) m= 7

d) m= 6

Answer from: Quest

gpe = mass x gravity constant x height or… gpe = mgh

where… mass: measured in kilograms (kg)

gravity: gravity constant on earth = 10.00 m/s2

height: measured in meters (m)

gpe: measured in joules (j) or kilojoules (kj)

how do you solve gpe?

gravitational potential energy (gpe) is the energy an object has because of its position above the. ground.

gpe = mass x gravity constant x height or… gpe = mgh.

mass:

note: to earn full marks when solving science word problems, you must show your work:

formula.

example:

given values:

mass = 0.3 kg.

Another question on Physics

Physics, 22.06.2019 08:00

While studying chemical reactions and conservation of matter, sarah's class conducted a variety of experiments. sarah and her lab partner found the mass of a wax candle and placed the candle in a flask. the students lit the candle and let it burn to completion. all that was left was wax and charred candle wick. per their teacher's instructions, the students found the mass of the products. their data can be seen in the data table. formulate a hypothesis the students could test to explain why the experiment did not support the law of conservation of matter. a) the students could repeat the experiment using different candles; there might have been a flaw in the candle. b) the experiment should be repeatable. the students should run several trials and then take an average of the after mass in each trial. c) the students should have someone in the class check their measurement skills as they repeat the experiment. they may have made an error using the balance. d) the students should burn the candle in a container that has some type of lid so that any gas that is a product of the reaction can be contained and massed. submit

Answers: 2

Answer

Physics, 22.06.2019 14:30

Which of the following changes will increase the capacitance of a parallel-plate capacitor? (there could be more than one correct choice.) a) increase the charge on the plates b) decrease the poten5al between the plates c) increase the potential between the plates d) introduce a dielectric material between the plates e) decrease the separation between the plates

Answers: 3

Answer

Physics, 22.06.2019 15:10

Where do magnetic lines of force enter earth?

Answers: 3

Answer

Physics, 23.06.2019 01:40

(8%) problem 12. a bowling ball of mass mb 3 kg 's rolled down the lane with a velocity ofy-2/ m s lt strikes a single remaining pin mp 0.93 kg head on. after the collision the bowling ball has a velocity (in the same direction) of v2 1.1 m/s. = ▲ 33% part (a) write an expression for the velocity of pin in the horizontal direction after the impact, im ,, 33% part (b) what is the pins speed in ms? 33% part (c) assuming the coefficient of friction s μ,-0.1. how far in meters could the pin slide before stopping if it doesn't topple?

Answers: 1

Answer

You know the right answer?

Ahigh-speed flywheel in a motor is spinning at 500 rpm when a power failure suddenly occurs. the fly...

Questions