(a) why is 103 to 105°c the drying temperature generally used for total solids analysis? under what conditions and why is 180 used as the drying temperature? (c) why is 550°c chosen as the combustion temperature in the volatile solids analysis? what possible problems would result if a lower or a higher temperature were used?
Answers: 3
Physics, 21.06.2019 21:30
Ascientist is tracking an object orbiting the sun that is found between mars and jupiter. in order to classify the object as an asteroid, it must be at least
Answers: 1
Physics, 22.06.2019 01:10
Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)
Answers: 3
Physics, 22.06.2019 10:30
You are given two vectors a⃗ =−3.00ι^ 5.00j^ and b⃗ =5.00ι^ 2.00j^. let the counterclockwise angles be positive.
Answers: 3
(a) why is 103 to 105°c the drying temperature generally used for total solids analysis? under what...
Computers and Technology, 23.09.2021 07:00
French, 23.09.2021 07:00
Mathematics, 23.09.2021 07:00
Mathematics, 23.09.2021 07:00
Mathematics, 23.09.2021 07:00
Mathematics, 23.09.2021 07:10
Mathematics, 23.09.2021 07:10