subject
Physics, 11.11.2019 20:31 clickbaitdxl

Constant-volume calorimeters are sometimes calibrated by running a combustion reaction of known δe and measuring the change in temperature. for example, the combustion energy of glucose is 15.57 kj/g. when a 2.000 g sample of glucose burns in a constant volume calorimeter, the calorimeter temperature increases from 21.45 to 23.34°c. find the total heat capacity of the calorimeter (in kj/k).

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 20:00
How much force must a locomotive exert on a 12840-kg boxcar to make it accelerate forward at 0.490 m/s2?
Answers: 1
question
Physics, 21.06.2019 23:00
1point) a skydiver weighing 130 lb (including equipment) falls vertically downward from an altitude of 14,000 ft and opens the parachute after 20 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.85|v|0.85|v| when the parachute is closed and is of magnitude 17|v|17|v| when the parachute is open, where the velocity vv is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. find the speed of the skydiver when the parachute opens. speed is 150.6121788 ft/s find the skydiver's height when the parachute opens. height is 2338.98591 ft find the limiting velocity vlvl after the parachute opens. (think about whether this should be positive or negative.) vl=vl= 7.647 ft/s
Answers: 2
question
Physics, 22.06.2019 01:20
Acar moves a distance of 50.0 km west, followed by a distance of 64.9 km north what was the magnitude of the displacement of the car, in units of kilometers?
Answers: 2
question
Physics, 22.06.2019 06:20
Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.
Answers: 1
You know the right answer?
Constant-volume calorimeters are sometimes calibrated by running a combustion reaction of known δe a...
Questions