Three disks are spinning independently on the same axle without friction. their respective rotational inertias and angular speeds are i,ω (clockwise); 2i,3ω (counterclockwise); and 4i,ω/2 (clockwise). the disks then slide together and stick together, forming one piece with a single angular velocity. what will be the direction and the rate of rotation ωnet of the single piece?

To protect all four receptacles on a branch circuit that surrounds a swimming pool, you would install which of the following configurations? a. gfci feed-through receptacle at the end of the load's circuit b. gfci-terminated receptacle at the beginning of the load's circuit c. gfci feed-through receptacle at the beginning of the load's circuit and the other receptacles connected to the load side of that receptacle d. gfci-terminated receptacle at each end of the load's circuit

Juan created a chart to him study for a test. which headings best complete the chart? x: transparent objects y: opaque objects x: opaque objects y: transparent objects x: high frequency waves y: low frequency waves x: low frequency waves y: high frequency waves

Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.