Afrequently quoted rule of thumb in aircraft design is that wings should produce about 1000 n of lift per square meter of wing. (the fact that a wing has a top and bottom surface does not double its area.) part (a) at takeoff, an aircraft travels at 69 m/s, so that the air speed relative to the bottom of the wing is 69 m/s. given the sea level density of air to be 1.29 kg/m3, how fast must it move over the upper surface to create the ideal lift?

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?

What is the equation for electrical work?

What are the dimensions of the cross section that passes through the points a, f, g, and d?