When a board with a box on it is slowly tilted to a larger and larger angle, common experience shows that the box will at some point "break loose" and start to accelerate down the board. the box begins to slide once the component of its weight parallel to the board, , equals the maximum force of static friction. which of the following is the most general explanation for why the box accelerates down the board after it begins to slide (rather than sliding with constant speed)? once the box is moving, w|| is greater than the force of static friction but less than the force of kinetic friction. once the box is moving, w|| is less than the force of static friction but greater than the force of kinetic friction. the coefficient of kinetic friction is less than the coefficient of static friction. when the box is stationary, w|| equals the force of static friction, but once the box starts moving, the sliding reduces the normal force, which in turn reduces the friction.

the reason for the acceleration month that the coefficient of kinetic friction is less than the coefficient of satic frictionExplanation:

This exercise uses Newton's second law with the condition that the acceleration is zero, by the time the body begins to slide. At this point the balance of forces is

    fr- w || = 0

The expression for friction force is that it is proportional to the coefficient of friction by normal.

    fr = μ N

When the system is immobile, the coefficient of friction is called static coefficient and has a value, this is due to the union between  the surface, when the movement begins some joints are broken giving rise to coefficient of kinetic friction less than static.  

In consequence a lower friction force, which is why the system comes out of balance and begins to accelerate.

      μ kinetic <μ static

  In all this movement the normal with changed that the angle of the table remains fixed.

Consequently, the reason for the acceleration month that the coefficient of kinetic friction is less than the coefficient of satic friction

the answer is ampere

the ampere is used to measure electricity. an ampere is a unit of electric current equal. a unit of measure for the flow of current in a circuit. one ampere is the amount of current flow provided when one volt of electrical pressure is applied against one ohm of resistance.