Physics, 11.09.2019 01:10 ToriChristine

According to archimedes’ principle, the mass of a floating object equals the mass of the fluid displaced by the object. use this principle to solve the following problems. (a) a wooden cylinder 30.0 cm high floats vertically in a tub of water (density 1: 00 g/cm3). the top of the cylinder is 13.5 cm above the surface of the liquid. what is the density of the wood? (b) the same cylinder floats vertically in a liquid of unknown density. the top of the cylinder is 18.9 cm above the surface of the liquid. what is the liquid density? (c) explain why knowing the length and width of the wooden objects is unnecessary in solving parts (a) and (b). 2.15.

Answers: 1

Show answers

Answers

Answer from: AleciaCassidy

Answers:

a) $\rho_{cylinder}= 0.55 g/cm^{3}$

b) $\rho_{liq}= 1.48 g/cm^{3}$

c) When we divided both volumes (sumerged and displaced) the factor $\pi r^{2}$ is removed during calculations.

Explanation:

a) According to Archimedes’ Principle:

A body totally or partially immersed in a fluid at rest, experiences a vertical upward thrust equal to the mass weight of the body volume that is displaced.

In this case we have a wooden cylinder floating (partially immersed) in water. This object does not completely fall to the bottom because the net force acting on it is zero, this means it is in equilibrium. This is due to Newton’s first law of motion, that estates if a body is in equilibrium the sum of all the forces acting on it is equal to zero.

Hence:

W_(cylinder)=B (1)

Where:

W_(cylinder)=m.g is the weight of the wooden cylinder, where is its mass and gravity.

is the Buoyant force, which is the force the fluid (water in this situation) exert in the submerged cylinder, and is directed upwards.

We can rewrite (1) as follows:

$m_{cylinder}g=m_{water}g$ (2)

On the other hand, we know density $\rho$ establishes a relationship between the mass of a body andthe volume it occupies. Mathematically is expressed as:

$\rho=\frac{m}{V}$ (3)

isolating the mass:

$m=\rho V$ (4)

Now we can express (2) in terms of the density and the volume of cylinder and water:

$\rho_{cylinder} V_{cylinder} g=\rho_{water} V_{water} g$ (5)

In this case $V_{water}$ is the volume of water displaced by the wooden cylinder (remembering Archimedes's Principle).

At this point we have to establish the total volume of the cylinder and the volume of water displaced by the sumerged part:

$V_{cylinder}=\pi r^{2} h$ (6)

Where is the radius and h=30 cm the total height of the cylinder.

$V_{water}=\pi r^{2} (h-h_{top})$ (7)

Where $h_{top}=13.5 cm$ is the height of the top of the cylinder above the surface of water and $(h-h_{top})$ is the height of the sumerged part of the cylinder.

Substituting (6) and (7) in (5):

$\rho_{cylinder} \pi r^{2} h g=\rho_{water} \pi r^{2} (h-h_{top}) g$ (8)

Clearing $\rho_{cylinder}$ :

$\rho_{cylinder}=\frac{\rho_{water}(h-h_{top})}{h}$ (9)

Simplifying;

$\rho_{cylinder}=\rho_{water}(1-\frac{h_{top}}{h}$ (10)

Knowing $\rho_{water}=1g/cm^{3}$ :

$\rho_{cylinder}=1g/cm^{3}(1-\frac{13.5 cm}{30cm})$ (11)

$\rho_{cylinder}= 0.55 g/cm^{3}$ (12) This is the density of the wooden cylinder

b) Now we have a different situation, we have the same wooden cylinder, which density was already calculated ( $\rho_{cylinder}= 0.55 g/cm^{3}$ ), but the density of the liquid $\rho_{liq}$ is unknown.

Applying again the Archimedes principle:

$\rho_{cylinder} V_{cylinder} g = \rho_{liq} V_{liq} g$ (13)

Isolating $\rho_{liq}$ :

$\rho_{liq}= \frac{\rho_{cylinder} V_{cylinder}}{V_{liq}}$ (14)

Where:

$V_{cylinder}=\pi r^{2} h$

$V_{liq}=\pi r^{2} (h-h_{top})$

Then:

$\rho_{liq}= \frac{\rho_{cylinder} \pi r^{2} h}{\pi r^{2} (h-h_{top})}$ (15)

$\rho_{liq}= \frac{\rho_{cylinder} h}{h-h_{top}}$ (16)

$\rho_{liq}= \frac{0.55 g/cm^{3} (30 cm)} {30 cm - 18.9 cm}$ (17)

$\rho_{liq}= 1.48 g/cm^{3}$ (18) This is the density of the liquid

c) As we can see, it was not necessary to know the radius of the cylinder (we did not need to knoe its length and width), we only needed to know the part that was sumerged and the part that was above the surface of the liquid.

This is because in this case, when we divided both volumes (sumerged and displaced) the factor $\pi r^{2}$ is removed during calculations.

Answer from: Quest

You yeah with the side of the yeah with a little bit of yeah.

Answer from: Quest

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2

Another question on Physics

Physics, 22.06.2019 01:50

Arod of some material 0.20 m long elongates 0.20 mm on heating from 21 to 120°c. determine the value of the linear coefficient of thermal expansion [in (degrees c)^-1] for this material.

Answers: 2

Answer

Physics, 22.06.2019 02:10

"an open tank has the shape of a right circular cone. the tank is 6 feet across the top and 5 feet high. how much work is done in emptying the tank by pumping the water over the top edge? note: the density of water is 62.4 lbs per cubic foot."

Answers: 2

Answer

Physics, 22.06.2019 16:30

One number is said to be an "order of magnitude" larger than another number if choose one: a. it is 10 times larger. b. it is 5 times larger. c. it is 3 times larger. d. it is 100 times larger. e. it is 2 times larger.

Answers: 1

Answer

Physics, 22.06.2019 17:40

Which describes an object in projectile motion? check all that apply.a.gravity acts to pull the object downb.the object moves in a straight path.c.the forward velocity of the object is 0 m/s.d.the object’s inertia carries it forward.e.the path of the object is curved.

Answers: 2

Answer

You know the right answer?

According to archimedes’ principle, the mass of a floating object equals the mass of the fluid displ...

Questions