A2 kg block is on a horizontal surface. a horizontal force is applied by a person to the block to pull it on the surface with an acceleration of 2 m/s. the coefficient of kinetic friction between the box and the surface is 0.3. how much work is done in joules by the person on the block if the block is pulled 50 m? a) 200 joules b) 250 joules c) o joules d) 300 joules e) 500 joules

Rubber on floor tile has a coefficient of kinetic friction of 1.0 and a coefficient of static friction of 2.0. how much force would a 3.5 lb. robot need to produce in order to start moving?

Agymnast dismounts off the uneven bars in a tuck position with a radius of 0.3m (assume she is a solid sphere) and an angular velocity of 2rev/s. during the dismount she stretches out into the straight position, with a length of 1.5m, (assume she is a uniform rod through the center) for her landing. the gymnast has a mass of 50kg. what is her angular velocity in the straight position?

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.