subject
Physics, 06.09.2019 16:10 kami23arap5p78v

If your front lawn is 19.0 feet wide and 20.0 feet long, and each square foot of lawn accumulates 1050 new snowflakes every minute, how much snow, in kilograms, accumulates on your lawn per hour? assume an average snowflake has a mass of 2.20 mg.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 21:50
What is the length x of the side of the triangle below? (hint: use the cosine function)
Answers: 1
question
Physics, 21.06.2019 22:00
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
question
Physics, 22.06.2019 01:20
Your target variable is δf, the magnitude of the difference in frequency between the waves emitted from the sonar device and the waves received by the device after reflecting off the whale. write an expression for δf in terms of the relevant frequencies using the subscript notation introduced above.
Answers: 3
question
Physics, 22.06.2019 05:10
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
You know the right answer?
If your front lawn is 19.0 feet wide and 20.0 feet long, and each square foot of lawn accumulates 10...
Questions