Athree-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 6.7 mm; the specimen fractured at a load of 2710 n when the distance between support points was 41 mm. another test is to be performed on a specimen of this same material, but one that has a square cross section of 19 mm in length on each edge. at what load would you expect this specimen to fracture if the support point separation is maintained at 41 mm?

First, launch the video below. you will be asked to use your knowledge of physics to predict the outcome of an experiment. then, close the video window and answer the question at right. you can watch the video again at any point. part a as in the video, we apply a charge +q to the half-shell that carries the electroscope. this time, we also apply a charge –q to the other half-shell. when we bring the two halves together, we observe that the electroscope discharges, just as in the video. what does the electroscope needle do when you separate the two half-shells again? view available hint(s) as in the video, we apply a charge + to the half-shell that carries the electroscope. this time, we also apply a charge – to the other half-shell. when we bring the two halves together, we observe that the electroscope discharges, just as in the video. what does the electroscope needle do when you separate the two half-shells again? it deflects more than it did at the end of the video. it deflects the same amount as at end of the video. it does not deflect at all. it deflects less than it did at the end of the video. submit

Contains chemical energy. a. heat b. light c. natural gas

Water flows through a garden hose which is attached to a nozzle. the water flows through hose with a speed of 2.19 m/s and through the nozzle with a speed of 19.8 m/s. calculate the maximum height (in m) to which water could be squirted if it emerges from the nozzle and emerges with the nozzle removed.