Physics, 21.08.2019 18:20 neariah24

In a section of horizontal pipe with a diameter of 3.00 cm the pressure is 5.21 kpa and water is flowing with a speed of 1.50 m/s. the pipe narrows to 2.50 cm. what is the pressure in the narrower region if water behaves like an ideal fluid of density 1000 kg/m3?

Answers: 1

Show answers

Answers

Answer from: sandy3711

The pressure at the narrower region reduces to 4.00 kPa

Explanation:

According to Bernoulli's theorem for an ideal fluid we have we have

$\frac{P}{\gamma _{w}}+\frac{v^{2}}{2g}+z=constant$

Applying this between the two sections under consideration we obtain

$\frac{P_{1}}{\gamma _{w}}+\frac{v_{1}^{2}}{2g}+z_{1}=\frac{P_{2}}{\gamma _{w}}+\frac{v_{2}^{2}}{2g}+z_{2}$

Now by equation of contuinity we have

$A_{1}v_{1}=A_{2}v_{2}$

$\therefore v_{2}=\frac{A_{1}v_{1}}{A_{2}}\\\\\therefore v_{2}=\frac{1.5\times 0.25\times \pi \times (3)^{2}}{0.25\times \pi \times (2.50)^{2} }\\\\\therefore v_{2}=2.16m/s$

Applying values in the bernoulli's equation and noting that $z_{1}=z_{2}$ we get

$\frac{P_{2}}{\gamma _{w}}=\frac{5.21\times 10^{3}}{1000\times 9.81}+\frac{1.50^{2}}{2g}-\frac{2.16^{2}}{2g}\\\\\therefore \frac{P_{2}}{\gamma _{w}}=0.40797\\\\\therefore P_{2}=4.00kPa$

Answer from: keltaylor

PB=4.0022kPA

Explanation:

For an ideal fluid (water in this case) we can use the Bernoulli equation to solve this exercise.

For two different points A and B inside an ideal fluid we can write that :

$PA+\frac{1}{2}.(D).(VA)^{2}+(D).(g).(hA)=PB+\frac{1}{2}.(D).(VB)^{2}+(D).(g).(hB)$

Where P is the pressure in that point.

Where D is the density of the fluid.

Where V is the speed of the fluid at that point.

Where g is the acceleration due to gravity.

Where h is the hight respect to a comparison plane.

The Bernoulli equation is an energy equation.

PA represents the energy due to pressure in the point A.

$\frac{1}{2}.(D).(VA)^{2}$ represents the kinetic energy in the point A.

And (D).(g).(hA) represents the potential energy in the point A.

We are going to use another equation. Given that we are considering the water as an ideal fluid, the flow is constant in the pipe.

Q=S.V

Q is the flow.

S is the section of the pipe and V is the speed of the fluid

Given that is constant, between two points A and B inside the pipe :

QA=QB ⇒

(SA).(VA)=(SB).(VB) (I)

The section of the pipe given its diameter can be calculated as :

$S=\frac{\pi (d)^{2}}{4}$

Where d is the diameter in that section.

Now, we write the Bernoulli equation between the two points. Given that this is a horizontal pipe, the potential energy term will be canceled because the two points will have the same potential energy respect to a comparison plane.

$PA+\frac{1}{2}.(D).(VA)^{2}=PB+\frac{1}{2}.(D).(VB)^{2}$ (II)

If we use (I) :

(SA).(VA)=(SB).(VB) ⇒ $VB=\frac{(SA).(VA)}{(SB)}=\frac{\frac{\pi (dA)^{2}}{4}.(VA)}{\frac{\pi (dB)^{2}}{4}}$ ⇒

$VB=\frac{(dA)^{2}}{(dB)^{2}}.(VA)$ (III)

Using (III) in (II) :

$5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}=PB+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{(dA)^{2}}{(dB)^{2}}.(VA))^{2}$

$5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}=PB+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{dA}{dB})^{4}.(VA)^{2}$

$PB=5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}-\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{dA}{dB})^{4}.(VA)^{2}$

$PB=5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}(1-(\frac{dA}{dB})^{4})$

Replacing the values of the diameters dA and dB we obtain that the pressure in B is

PB=4.0022kPa

Answer from: Quest

28. evolution

29. environment, survive, offspring

explanation:

Answer from: Quest

spectral lines lyman is one set

Another question on Physics

Physics, 22.06.2019 10:00

The frequencies refer to the sample data collected from a population of interest when performing a hypothesis test comparing two or more population proportions.

Answers: 2

Answer

Physics, 22.06.2019 12:50

The vapour pressure of benzene is 53.3 kpa at 60.6 °c, but it fell to 51.5 kpa when 19.0 g of a non-volatile organic compound was dissolved in 500 g of benzene. calculate the molar mass of the compound.

Answers: 2

Answer

Physics, 22.06.2019 13:40

An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.

Answers: 2

Answer

Physics, 22.06.2019 23:10

Atorque acting on an object tends to produce a. equilibrium b. rotation c. linear motion d. velocity e. a center of gravity

Answers: 2

Answer

You know the right answer?

In a section of horizontal pipe with a diameter of 3.00 cm the pressure is 5.21 kpa and water is flo...

Questions