subject
Physics, 02.08.2019 18:10 nikkiebartels

Athree-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 6.7 mm; the specimen fractured at a load of 2710 n when the distance between support points was 41 mm. another test is to be performed on a specimen of this same material, but one that has a square cross section of 19 mm in length on each edge. at what load would you expect this specimen to fracture if the support point separation is maintained at 41 mm?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:30
Fft review: linspace, fs, fftshift, nfft 1. generate one second of a cosine of w,-10hz sampled at f, = 100hz and assign it to x. define a tt as your time axis 2. take 64 points fft. 3. as you remember, the dft (which the fft implements) computes n samples of s2t where k-0,1,2, n -1. plot the magnitude of this 64-points fft at range 0 to 63, what do you think of this graph? 4â·to get the x-axis into a hz-frequency form, plot this 64-points fft between-50 to 50 (the 100hz sampling rate) and have n-points between them. 5. according to your figure, what frequency is this cosine wave at? 6. remember that the fft is evaluating from 0 to 2ď€. we are used to viewing graphs from-ď€ to ď€. therefore, you need to shift your graph. 7. now according to your shifted graph. what frequency is this at? 8. note that the spikes have long drop-offs? try a 1024-point dft. note that the peak is closer to 10 and the drop-off is quicker. although, now sidelobes are an issue
Answers: 2
question
Physics, 22.06.2019 07:30
Boxing gloves are padded to lessen the force of a blow. (a) calculate the force exerted by a boxing glove on an opponent’s face, if the glove and face compress 7.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. (b) calculate the force exerted by an identical blow in the gory old days when no gloves were used and the knuckles and face would compress only 2.00 cm. (c) discuss the magnitude of the force with glove on. does it seem high enough to cause damage even though it is lower than the force with no glove?
Answers: 1
question
Physics, 22.06.2019 11:00
The government has declared that a hurricane is likely to hit the east coast. which government division is part of acf and provides guidance to citizens? a. job opportunities for low-income individuals b. office of human services emergency preparedness and response c. assets for independence d. low-income home energy assistance program
Answers: 1
question
Physics, 22.06.2019 14:40
A5 foot by 5 foot box culvert is buried 6 feet beneath the surface of the ground. a crosssection of this very long culvert (into and out of the page) is illustrated below. assume that the soil in which the culvert is buried has the following properties: jt = 120 pcf, w = 12%, ko = 0.50, ka = 0.33, and kp = 3.00. calculate the total horizontal force per unit length of culvert (fh) felt on one of the vertical faces of the culvert.
Answers: 1
You know the right answer?
Athree-point bending test was performed on an aluminum oxide specimen having a circular cross sectio...
Questions
question
Mathematics, 08.06.2021 18:10
question
Mathematics, 08.06.2021 18:10
question
Social Studies, 08.06.2021 18:10
question
Mathematics, 08.06.2021 18:10
question
Mathematics, 08.06.2021 18:10
question
Mathematics, 08.06.2021 18:10
question
History, 08.06.2021 18:10