subject
Physics, 30.07.2019 01:10 beto66

Acylindrical 4340 steel bar is subjected to reversed rotating-bending stress cycling, which yielded the test results presented below. if the maximum applied load is 5,000 n, compute the minimum allowable bar diameter to ensure that fatigue failure will not occur. assume a factor of safety of 2.25 and that the distance between load-bearing points is l=55.0 mm

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 04:00
However, had it been a real sound, the sound's pitch would have been increased by the doppler effect, since the falcon was moving the source of the sound. perpendicular to away from towards at the same speed as
Answers: 1
question
Physics, 22.06.2019 09:40
Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?
Answers: 2
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
question
Physics, 22.06.2019 19:30
Which describes increasing the efficiency of energy resource
Answers: 1
You know the right answer?
Acylindrical 4340 steel bar is subjected to reversed rotating-bending stress cycling, which yielded...
Questions
question
Mathematics, 28.01.2021 01:10
question
Mathematics, 28.01.2021 01:10
question
Physics, 28.01.2021 01:10